The Oregon Cottage Etch glazed door will really make a statement in your home. American white oak panelling provides a cottage feel, while smart vertical lines etched in the top glass panel give the door a modern edge.

• High Quality American white oak real wood veneer
• The Oregon Range is available in many designs, with a mixture of styles including solid panel and glazed options
• Solid construction gives this door impressive acoustic properties
• This range features Fire Door options
• Doors are supplied unfinished, ready for your choice of decoration including paint, stain or lacquer
• ‘Paint and Peel’ film on all glazed doors make this process quicker and easier with less mess
• Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces
• 5 years manufacturing guarantee

Please note: Create a door pair when you purchase the Jeld-Wen pair maker along with these doors - Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces.

Dimensions

Width: 686mm
Height: 1981mm
Thickness: 35mm

Technical Information

Material composition: White Oak Veneer, Solid Particle Board Core

Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions.
Trim: Each door is supplied with a 5mm trim option on all four edges. There is no trim allowance on the top edge for fire doors within this range. Bi-fold doors are made undersized to allow for operation - please note they should not be trimmed.

Storage: When receiving door it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work.

Finishers: It is essential that the door is completely finished on the two faces and all FOUR edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory but we strongly recommend you that you treat this door in accordance with the paint manufacturer’s instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims.