XL Joinery Ledged & Braced Shed Door/Wooden Gate

Code:

Brand:

XL Joinery

View full product details

View questions about this product

Create a wishlist

Anne Kaye.

Description

With its traditional boarded vertical panel design, this external rustic style pine door or gate by XL Joinery is crafted using a tongue and groove method, where each panel interlocks with a ridge on one side. The LB ledged & braced door comes with loose pinned braces, allowing for adjustments as needed. The boarded braces are secured using staples. Ensure hinges are positioned where the braces point downward (as shown on the left-hand side in the image).

Features & Benefits: XL Joinery Ledged & Braced Shed Door/Wooden Gate

Boarded, ledged and braced
Ready for home finishing
Softwood Pine
Natural colour
FSC Certified
Traditional boarded vertical panel design
All braces fixed in place with staples
Solid untreated softwood requires sealing and painting
Staple holes will need filling prior to decoration
Available in a range of sizes (27"-36")
Manufactured to a high standard

Finish

This wooden door/gate is supplied unfinished, ready to paint or stain in a finish that will complement the rest of your property.

Technical Information

Not recommended for use externally where exposed to central heating on the inside.It is essential these doors are thoroughly painted prior to exposure to the weather in accordance with our door care advice. Face knots should be sealed prior to painting to prevent resin bleed, which can result where exposed to ultra violet light. Screw or staple holes will need filling prior to decoration.Must be installed and sealed in accordance with our "Door Care and Maintenance Advice" which comes supplied with each door.It is never advisable or intended that timber external doors be fully exposed to the worst elements of the weather, even if well coated. A southerly or south-westerly elevation is the worst direction for prevailing weather and exposure to the hottest sun can seriously degrade external doors.We recommend these are set back from the front face of the building or covered by a canopy.Always fit with a suitable weatherboard regardless of frame cill type fitted to prevent droplets of moisture hanging from the door bottom.We recommend washing down with warm water and detergent every two to three years and re-coating in order to retain good appearance.

Storage

When receiving a door, it should be laid flat, fully supported off the floor in a cool, dry and fully ventilated area with protective packaging complete.

Product Specification

Door Thickness: 16mm (boarded panels), 38mm (boarded panels including ledging)
Weight: 33kg
Glazing: No Glazing
Finish: Unfinished
Colour: Natural
Door Handing: Left or Right Handed
Core: Boarded Ledged and Braced
Material: Softwood
Material: Pine
Trim Tolerance - Top: 12mm
Trim Tolerance - Bottom: 12mm
Trim Tolerance - Sides: 12mm

Standards & Certification

Manufactured from FSC Certified Wood: The Forest Stewardship Council is an independent organisation that supports the responsible management of forests worldwide.

Please note:

These doors are not recommended for use internally.
Must be installed and sealed in accordance with manufacturers advise which comes supplied with each door.
Not recommended for use externally where exposed to central heating on the inside.

Specification

Dimensions

Door Height 1981mm
2032mm Door Thickness 44mm Door Width 686mm
762mm
813mm
838mm
915mm Size 1981mm x 686mm (78x27 inch)
1981mm x 762mm (78x30 inch)
1981mm x 838mm (78x33 inch)
1981mm x 915mm (78x36 inch)
2032mm x 813mm (80x32 inch)