Order Helpline 01752 422 501

XL Joinery External Oak Door Stain and Sealer Kit

Product Code:
OSKIT
Est. Delivery: 3-5 Working Days
Shipping costs displayed in basket.
We can let you know when this product is back in stock.

This product is proving to be very popular and has unfortunately sold out.

Enter your email below and we'll notify you as soon as this product is back in stock:

Subject to stock availability, if products on a 24 hours service are ordered alongside products NOT on a 24 hours service, this may delay your whole order.

View Transport Policy

All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlands and Islands, a member of our helpline team will contact you prior to processing your order should an additional delivery charge apply.

While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

£64.94 Incl. VAT
Oops! Please select from the options

Product Description

To guarantee the look and long term performance of an external oak doors then use a quality finish that has been designed to work with our external oak collection. The finishing kits provide everything you need to finish an external door in one box, including: Base Coat, Top Coat and End Grain Sealant.

Specifications

Box contains:

1 x 1L pot of oak top coat
1 x 500ml pot of oak base coat
1 x 250ml pot of end grain sealer in one handy kit

Dimensions

Length: 230mm
Height: 127mm
Depth: 165mm

Technical Information

Please refer to the instructions included with the kit and the information on each tin prior to staining each door

Coating Schedule:

  1. Apply ONE coat of XL Joinery base coat to all faces and edges including the top and bottom edges of the doors, allowing at least 4 hours drying time between coats.
  2. Apply TWO coats of XL Joinery end grain sealer to the top and bottom edges of the doors, allowing at least 2 hours drying time before applying the second coat of end grain sealer and subsequent recoating
  3. Apply TWO coats of XL Joinery top coat to all faces and edges including the top and bottom edges of the doors, allowing at least  4 hours drying time between coats
  4. Ensure that all lock, letterbox and hinge cut-outs are also finished to the same degree as the timber surface

Finishing:

  1. Consult the Material Safety Data Sheet before use
  2. Stir product well before use
  3. Check colour
  4. Apply according to the Technical Data Sheet with reference to the coasting instructions 
  5. Always use appropriate safety equipment

General Instructions:

  1. Coatings should not be applied if the treatment is 10C or below, or in damp or rainy conditions. Drying times will vary according to environmental conditions
  2. Lightly sand the substrate to achieve a key (P240 grit abrasive recommended). Round off any sharp edges to a 2-3mm radius. Always sand along the grain and remove any rust prior to painting
  3. Prior to any coating of your joinery please ensure that all substrates are clean and dry
  4. Stir the finish well prior to use then apply coats with a quality synthetic fibre brush, working along the grain and re-loading the brush at regular intervals to ensure sufficient build
  5. Ensure all lock, letterbox and hinge cut outs are also finished to the same film thickness and number of coats as the timber surfaces.
  6. It is important to apply the full coating schedule (base coat, top coat and end sealer) to your door before final installation and exposure to elements
  7. Denib between coats using a fine grade P240 grit abrasive paper ensuring you do not break the surface of the coating system. Remove all dust before applying the next coat.

Maintenance

To ensure long life and appearance of the door, all coatings should be washed down annually to remove any surface pollution and check the finishing treatment and touch up as necessary. Full retreat the door every few years or as required, depending on degree of exposure. Door located in exposed areas will require more frequent maintenance coats.

Product Documents

There are no product documents to show.

Details

Finish Oak Volume 1l
500ml
250ml

Products We Recommend

loading...

Questions & Answers

There are currently no questions for this product.

Product Enquiry Form

XL Joinery External Oak Door Stain and Sealer Kit

*Required Field

Would you like to empty your basket?

Yes No

Sorry

It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.

If you wish to access our site please either upgrade your browser or download an alternative.