This hardwood solid core blank fire door has been constructed using superior hardwood solid laminated core construction, solid hardwood lippings and thick hardwood face veneer. It can be cut to any height and trimmed on width however the door may need to be re-lipped if reduced/trimmed by more than 10mm per edge.
Material: Hardwood
Core construction: Solid Core
Door thickness: 44mm
Finish: Unfinished
Fire rating: 30 minutes fire protection (FD30 rating)
Trimming tolerance: Up to 6mm
Lipping: Hardwood lipping - the height of the door can be reduced from the bottom only, horizontal cuts must be re-lipped with minimum 15mm high density hardwood lipping
27" x 78" (686mm x 1981mm), 30" x 78" (762mm x 1981mm), 32" x 80" (813mm x 2032mm), 33" x 78" (838mm x 1981mm), 33" x 81" (838mm x 2057mm), 34" x 80" (864mm x 2032mm), 36" x 84" (914mm x 2134mm), 48" x 96" (1219mm x 2438mm), 526 x 2040 x 44mm, 626 x 2040 x 44mm, 726 x 2040 x 44mm, 826 x 2040 x 44mm, 926 x 2040 x 44mm
Question:
What do you mean by " re lipping ". I would need to cut 40mm off the bottom.
Answer:
The lipping protects the door core and is what allows for adjustments, by trimming a timber based fire door without having the required trimming you create risk to adversely affecting its fire performance. If in doubt seek advice from a fire door specialist.
Question:
Can this product be cut to size and then re-lipped as the true size required is 2040mm(H) x 750mm(W) x 44mm (Thick)? Can this product be supplied with lock and/or intumescent strips fitted, preferably with both?
Answer:
This door can be cut and re-lipped to the size you require. Whilst the door is not supplied with any additional accessories, we do have these available on our website, which you can add to an order.
Question:
how do you detach the supplied lipping?
Answer:
To detach the supplied lipping you simply slide it off and this is easy to then slide back on.
Question:
Hello, does this door comply with Part L of the Building Regulations (warmth and insulation)
Answer:
LPD advise that this door has a U-Value of 1.6 and complies with the current building regulations.
Question:
Can you supply spare lippings if I need to remove the existing?
Answer:
The lippings are not something we sell separately, however, the lipping that is included with these doors is re-attachable.
Question:
Can glazing apertures be cut into the door providing hockey stick glazing beads are used? Are the lippings concealed as I need to cut 32mm off the width and 40mm off the height. Are the lippings re-usable?
Answer:
10mm solid hardwood lippings included for slight adjustments - please note the door may need to be re-lipped if trimmed more than 10mm
As it is a fire door you will not be able to cut from the top, you would only be able to cut from the bottom.
Question:
Can I paint this door?
Answer:
This door is supplied unfinsihed, you will be able to paint the door once it arrives. The manufacturers' finishing instructions will arrive with the door
Question:
have you got any 35mm door blanks
Answer:
These door blanks are currently only offered in a 44mm FD30 option
Question:
have you got any 35mm door blanks
Answer:
These door blanks are currently only offered in a 44mm thick, fire rated option
Question:
Hi, can the door be pre hung and delivered in the frame. Thanks
Answer:
LPD offer a bespoke service for doorsets which would cover your request. Lead times are 10-12 weeks.
Question:
can it be stained?
Answer:
With a manufacturer recommend stain.
Question:
I am looking for a solid door for the side door of a garage. The actual dimentions are 1712 by 665. Would the Hardwood solid core unfinished Brazil door be suitable for me to cut down to the side as stated?
Answer:
It can be cut to any height and trimmed on width however the door may need to be re-lipped if reduced/trimmed by more than 10mm per edge.
Question:
Is it possible to cut an arch in the top of the door?
Answer:
If you were to trim more than 10mm per edge, you will come into contact with the core material. This door can be re-lipped. It would depend on the skill of the carpenter as to whether they can work with this.
Question:
What is the weight of this door blank please?
Answer:
The weight of this door is approximately 64kgs.
Question:
Can you please advise the weight of these doors?
Answer:
The weight of this door is approximately 50kgs.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.