MATERIAL: Brass TYPE: Fire rated euro Profile Lock Cylinder STYLE: Key lockable cylinder with thumb turn FIXINGS: Connecting screws included ADDITIONAL FEATURES: Three keys included, fire rated Description Compact thumb turn euro cylinder barrel in 30/10/30 (35/35T) co...Read More
MATERIAL: Brass
TYPE: Fire rated euro Profile Lock Cylinder
STYLE: Key lockable cylinder with thumb turn
FIXINGS: Connecting screws included
ADDITIONAL FEATURES: Three keys included, fire rated
Configuration: 35/35T - 35mm/35mm (edge to fixing hole to thumb turn edge)
Overall barrel length: 70mm
Overall length (inc thumb turn): 100mm
Barrel height: 33mm
Barrel width: 17mm
Fixing bolt hole diameter: 5mm
For example: 35/35 lock is A = 35mm / B = 35mm
The size of cylinder you need is determined by the thickness of the door and handle combination, for this reason there are many sizes available and you will need to be careful that you measure the cylinder accurately (one size will not fit all).
It is possible to measure a door cylinder in the door, but to be sure it's best to remove it first.
Measurement A: measure from the keyhole end to the middle of the central screw hole (e.g. 35 mm).
Measurement B: measure from the middle of the central screw hole to the end (e.g. 35 mm).
Total cylinder length = Measurement A + Measurement B
1. Open the door and unscrew the one fixing screw which is located on the lock faceplate (the strip of metal the full length of your door), in line with the bottom of the door cylinder.
2. Put the key into one side whilst holding the other side firm.
3. Turn the key and the cylinder should slide out, if it does not turn the key in the opposite direction and the cylinder should slide out.
4. Take your new cylinder lock and insert the new key and turn it until the cam is inline with the body of the cylinder. Insert the new cylinder into position and replace the fixing screw.
5. If the door cylinder is offset (i.e. 40/60, 30/50 etc) ensure the offset is protruding from the correct side. Check the operation of the lock before you close the door.
Your new door cylinder should protrude between 2mm and 5mm from the handle back plates, but due to the overall lengths of cylinders available this is not always possible. It is most sensible to go for exactly the same size as you are replacing (unless your old cylinder was protruding excessively).
There are no product downloads to show.
There are currently no questions for this product.
Pay in 4 interest-free payments of £249999999.75
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
