JB Kind Internal Oak CHARNWOOD Pre-Finished 2 Panel Fire Door FD30

• High quality White American Oak veneer and edges
• 30 minutes fire protection rating (FD30)
• Two raised panels
• Pre-finished with a clear lacquer
• Solid engineered core

Technical Information

This door has been given a FD30 rating - meaning it has 30 minutes protection from fire damage. These doors are also thicker (44mm) as opposed to standard rating doors.

Pre-finished with a clear lacquer finishing product.

Material composition:Engineered cores are manufactured from reconstituted wood such as chipboard, blockboard, plywood or MDF. Each of these raw materials can be used in different ways to make up the core component parts of a variety of doors. They are more stable in use than solid timber within the modern built environment.

Installation:Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions.

Storage:When receiving door it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work.

Finishers:Be sure to select a finisher with a lasting seal between component parts. Please avoid water based finishers, using only good quality solvent based finishers. Danish oil is not suitable for use on any of our doors.

FSC certified
Material:Oak
Core Construction:Solid flax core
Door Thickness:44mm
Finish:Pre-finished with clear lacquer
Glazing:n/a
Fire Rated:30 minutes fire protection (FD30)
Trimming: 6mm per side