The Oakfield fire door features a traditional 6 panel design and comes in a variety of finishes. Traditional 6 panel design 30 minute fire protection Sound reducing Undercoated ready for your choice of finish Traditional and contemporary design option available Glazed,...Read More
The Oakfield fire door features a traditional 6 panel design and comes in a variety of finishes.
Width: 838mm
Height: 1981mm
Thickness: 44mm
Material composition: Solid construction 30 minute fire doors to fit a standard 44mm rebate frame. Ironmongery can be placed anywhere across the surface of the door. The weight is approximately 35kg.
Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work.
Trimming: 6mm from the bottom of the door and 4mm from each vertical edge. The top of the door should not be trimmed due to the manufacturing identifications.
Finishers: It is suitable for a Hi-Build paint finish only, using a suitable base coat primer with ‘knotting’ solution. 8mm trim option on all 4 edges. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturer’s instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims.
Question:
Does this FD30 fore door product code: W290FDF comply with BS 476:22?
Answer:
Yes it does, certification can be downloaded from the manufacturer website.
Pay in 4 interest-free payments of £20.69
Learn more