Crown Cut Oak cross directional veneered faces with feature ash veneer inlay in both stiles, the door has an open pore clear satin lacquer finish. This 44mm FD30 door has a solid construction with 18mm solid oak lipping. Pre-Finished - ready to install FD30 fire protectio... Read More
Crown Cut Oak cross directional veneered faces with feature ash veneer inlay in both stiles, the door has an open pore clear satin lacquer finish.
This 44mm FD30 door has a solid construction with 18mm solid oak lipping.
Sizes available
1981 x 610mm x 44mm
1981 x 686mm x 44mm
1981 x 762mm x 44mm
1981 x 838mm x 44mm
If a door needs to be trimmed it must be reduced equally from both sides. Each side of a door may be trimmed up to a maximum of 6mm for doors with a lipping 10mm or more, and 3mm for doors with a 6mm lipping. Please note any trimming over the 6mm overall for the fire doors will invalidate the FD30 rating.
We recommend the use of 3 hinges to offer more rigidity and strength.
Untreated products must be fully sealed prior to hanging – this applies to all surfaces including tops, bottoms and all recesses cut for hinges, locks, handles and letter plates etc. Waxes and oils are not considered suitable for sealing a door and if used will invalidate any guarantee should the door subsequently fail.
There are no product downloads to show.
There are currently no questions for this product.
Products We Recommend
Product Enquiry Form
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
