Order Helpline 01752 422 501
Order Helpline 01752 422 501
Help & Advice
Contact Us
Account
0 0 Basket
Shop
Home Accessories Wood Stain XL Joinery Pot of External Oak Door Base Finishing Coat (500ml)

XL Joinery Pot of External Oak Door Base Finishing Coat (500ml)

Code:
OSKIT-BASE
Brand:
XL Joinery

To guarantee the look and long term performance of an external oak doors then use a quality base coat designed for the XL Joinery external oak door collection. Specifications Type: External oak door base coatSize: 500ml pot Dimensions Pot Diameter: 91mmPot Height: 98m...Read More

View full product details
View questions about this product
Create a wishlist

"Doors were in good condition"

mike sparkes
Description Specification Downloads Q&A

Description

To guarantee the look and long term performance of an external oak doors then use a quality base coat designed for the XL Joinery external oak door collection.

Specifications

Type: External oak door base coat
Size: 500ml pot

Dimensions

Pot Diameter: 91mm
Pot Height: 98mm

Technical Information

Please refer to the instructions included with the kit and the information on each tin prior to staining each door

We recommend using one coat of base coating per door

Important:

When using this base coat in conjunction with a top coat and sealer (must be compatible XL Joinery branded pots), please refer to the coating schedule below for the correct order (applicable part in bold):

  1. Apply ONE coat of XL Joinery base coat to all faces and edges including the top and bottom edges of the doors, allowing at least 4 hours drying time between coats.
  2. Apply TWO coats of XL Joinery end grain sealer to the top and bottom edges of the doors, allowing at least 2 hours drying time before applying the second coat of end grain sealer and subsequent re-coating
  3. Apply TWO coats of XL Joinery top coat to all faces and edges including the top and bottom edges of the doors, allowing at least  4 hours drying time between coats
  4. Ensure that all lock, letterbox and hinge cut-outs are also finished to the same degree as the timber surface

Finishing:

  1. Consult the Material Safety Data Sheet before use
  2. Stir product well before use
  3. Check colour
  4. Apply according to the Technical Data Sheet with reference to the coasting instructions 
  5. Always use appropriate safety equipment

General Instructions:

  1. Coatings should not be applied if the treatment is 10C or below, or in damp or rainy conditions. Drying times will vary according to environmental conditions
  2. Lightly sand the substrate to achieve a key (P240 grit abrasive recommended). Round off any sharp edges to a 2-3mm radius. Always sand along the grain and remove any rust prior to painting
  3. Prior to any coating of your joinery please ensure that all substrates are clean and dry
  4. Stir the finish well prior to use then apply coats with a quality synthetic fibre brush, working along the grain and re-loading the brush at regular intervals to ensure sufficient build
  5. Ensure all lock, letterbox and hinge cut outs are also finished to the same film thickness and number of coats as the timber surfaces.
  6. It is important to apply the full coating schedule (base coat, top coat and end sealer) to your door before final installation and exposure to elements
  7. Denib between coats using a fine grade P240 grit abrasive paper ensuring you do not break the surface of the coating system. Remove all dust before applying the next coat.

Maintenance

To ensure long life and appearance of the door, all coatings should be washed down annually to remove any surface pollution and check the finishing treatment and touch up as necessary. Full retreat the door every few years or as required, depending on degree of exposure. Door located in exposed areas will require more frequent maintenance coats.

Dimensions

Door Thickness 40mm

Details

Finish Oak Volume 500ml Door Style Barn

Downloads

There are no product downloads to show.

Questions & Answers

There are currently no questions for this product.

Products We Recommend

    loading...

    Product Enquiry Form

    XL Joinery Pot of External Oak Door Base Finishing Coat (500ml)

    *Required Field

    Super Customer Service

    Transparent Pricing & Secure Payments

    Nationwide Delivery Available On All Orders

    Specialist Supplier Of Over 6000 Doors & Door Accessories

    PayPal Credit

    Start right away with 4 months to pay

    Enjoy 0% over 4 monthly instalments*

    View finance options

    * Subject to status. Minimum spend required. T&Cs apply.

    The SMART way to buy trade building materials

    Sign up today for a cash or credit account, exclusive discounts, rebates and rewards with a Building Superstore Account

    Grab a Building Superstore account today
    Good Builds start with our SUPER stores See our specialist stores
    Good Build Superstore background

    Be first to know about offers, product deals, exclusive discounts and industry news.

    Would you like to empty your basket?

    Yes No

    Sorry

    It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.

    If you wish to access our site please either upgrade your browser or download an alternative.